• ASA Filament  1.75mm Natural - Spool 750 gram

Acrylonitrile-Styrene-Acrylate (ASA) polymers are amorphous and have mechanical properties similar to those of ABS plastics. However, the ASA properties are far less affected by outdoor weathering. The outstanding weather resistance abilities of ASA is due to the acrylic ester elastomer. ASA parts have good chemical and heat resistance, and high impact strength, even at low temperatures. Typical ASA applications are buiding/construction, automotive and recreation parts.

The ASA Filament contains unique properties because the material has an extremely constant diameter and roundness. On top of that the ASA filament does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the ASA Filament particularly suitable for FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

Measurements & Tolerance

Size: 1,75 mm Filament

Filament Net Weight: 750 gram

Diameter tolerance: +/- 0,05mm

Roundness: 99%


Printer nozzle temperature 240 - 280°C

Heated bed temperature 90 - 110°C

To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. This cannot be a room where people sleep.

When the 3D printer is not being used it is important to keep the ASA Filament in a bag and stored in a cool, dry and dark place until it is used again.


ASA Filament 1.75mm Natural - Spool 750 gram

  • Product Code: 4M-790
  • Availability: In Stock
  • 27.50€

  • Ex Tax: 22.36€


all product photos are for illustrative purposes only !