Gboard is a unique Arduino board which features a SIM900 GSM/GPRS module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller. This board will add wireless XBee / nRF24L01+ control as well as GSM/GPRS connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless!
Gboard can be used as a GSM/GPRS data transfer or wireless communication project development platform.
Gboard support wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it.
Note:
1. There is no USB connector on the board nor is there any USB hardware, you have to use a serial connection or ICSP.
2. When you upload sketch to Gboard, please choose the board Arduino Duemilanove w/ ATmega328Bootloader.
3. The bootloarder file is ATmegaBOOT_168_atmega328.hex, you can find it in the directory arduino\hardware\arduino\bootloaders\atmega

General Specifications:

Microcontroller: ATMega328P
External Resources: Onboard Wireless & Electronic Brick Interface
RAM Capacity: 2K
FLASH Capacity: 32K
I/O Operation Level: 3.3V
Board Size: 89mm x 61mm
Version: 1.0

Documents
Please visit the WIKI PAGE for more info about this product. 

Write a review

Note: HTML is not translated!
    Bad           Good

GBoard

  • Product Code: IT-131
  • Availability: In Stock
  • 55.00€

  • Ex Tax: 44.72€


all product photos are for illustrative purposes only !