Filament for printing with 3D printers.

ABS is general purpose plastic, used in the popular LEGO bricks.
It is recommended to use a heated bed with this material to prevent warp.

Properties

		PLA	ABS
Trademark		AI-1001	Chimei757
Density	g/cm3, 21.5°C	1.25	1.01
Melt Flow Index	10min,2.16kg	5	5
Melt Point	°C	160-165	220-230
Heat-Deflection-Temperature	°C,0.455MPa	50	85
Yield Strength	Mpa 5mm/min	45	45
Impact Strengh	KJ/m2	5	16
Tensile break	%	20%	30%
Accuracy	-	3mm±0.05mm, 1.75mm±0.05mm	3mm±0.05mm, 1.75mm±0.05mm

REAL ABS 1.75mm Yellow - Spool 1kg

Qty

all product photos are for illustrative purposes only !

30.44€