Description

Polylactic acid or polylactide called PLA is a thermoplastic aliphatic polyester made of renewable resources like corn or starch. PLA has a relative low melting temperature, 175°C, and is a very hard material. You can use it for the most common prints and is easy to print with.

Temperature settings

You only can print with the right temperature settings. The temperature setting can be different on your type of extruder. This is depending on the heat transfer from the extruder to the filament so you can use this as guideline but please adjust it to your own extruder.

Melting temperature: 175 °C
Nozzle temperature:  190°C - 200°C
Heated bed temperature: 30°C

Specifications

Printing properties

Diameter tolerance 0.05 mm

Diameter 1.75 mm

Specialty Glow in the dark

Food safe Yes

Color Neutral/Green

Heated bed temp. - Print sticker 0-30 °C

Temperature - heated bed 0 - 50 °C

Temperature - extruder 190 - 210 °C

Filament type PLA

Spool dimensions

Length filament 330 m

Weight filament 1000 g

Weight spool 300 g

Width 85 mm

Inner diameter 60 mm

Outer diameter 160 mm

impressão 3d, impressora 3D, filamento, PLA, ABS, reprap, lisboa