• 1.75mm StonelFil - Terracotta

StoneFil

StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.

This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient color linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient color shading.

Unique features

Easy-to-print

50% gravimetric powdered stone filling
- ±37% heavier than “normal” PLA

Matte and rough stone-like finish

Unique natural/organic gradient color linings
- Every print has its unique natural stone gradient color shading

Abrasiveness

StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.


Color: Terracotta (RAL ±2012)

Filament Net Weight: ± 0.5 Kg

Material: StoneFil™

Transparency: Opaque

Diameter: 1.75mm

Diameter Tolerance: ± 0.05 mm

Print Temperature Guideline: ± 190 - 240°C

Heat bed Temperature: ± 0 - 60°C

Melting Temperature: ± 77 - 153°C

Glass Transition Temperature: ± 57°C

Ovalidity Tolerance (max): ± 5%

Density (21.5°C): 1700 kg/m³

Print Speed Guideline: Medium/High, comparable with PLA

Impact Strength: 2.9 kg/m²

Tensile Modulus: 4760 MPa

Yield Strength: 38.0 MPa



Write a review

Note: HTML is not translated!
    Bad           Good

1.75mm StonelFil - Terracotta

  • Product Code: FF-661-2
  • Availability: In Stock
  • 33.00€

  • Ex Tax: 26.83€


all product photos are for illustrative purposes only !