The X-Carve Base Kit PLUS includes everything you get on the standard X-Carve Base Kit with two extras, the End Mill Starter Kit so you can start carving from day 1 and the 500mm Drag Chain Kit to make sure all wires are organized properly.

Build the size you need
Carving circuit boards or skateboards? Choose the size that fits your life (and workshop). The standard 500mm rails give you about 300 x 300mm (12 x 12") work area. 
Less — but better
With a relentless focus on reducing the part count and improving rigidity, we designed single-piece extrusions for X‑Carve's gantry and spindle mount. New Y axis plates bring the spindle closer to the center, decreasing flex. 

The result is a dramatically simpler assembly, extra rigidity, and more accurate carving.
Fully-integrated spindle power and control
We've stepped up our spindle game. You'll get our new 24VDC spindle with our all-in-one power supply. The power supply runs both the machine's motors and spindle — giving you spindle control through G-code. 

Or bring your own router. We have mounts for those too.
The easiest software, free
We built Easel® to make 3D carving accessible to everyone. No more complex "toolchains" — just a single intuitive, web-based app for designing and carving. 

Here's what some of our thousands of happy Easel users have to say:
What's included:

X-Carve Core Components

  • 500mm Rail Kit
  • Black MakerSlide, extrusions and GT2 belts
  • M8 Threaded Rod Lead Screw Kit
  • M8 threaded rod, Delrin nut and hex nut
  • 500mm Waste Board Kit
  • Waste board and hardware (clamps not included)
  • NEMA 17 Stepper Motor Kit
  • Four 60oz-in stepper motors, pulleys, hardware
  • Arduino/gShield Motion Controller Kit
  • Arduino, gShield, enclosure, fan, USB cable, wire, hardware
  • Power Supply Kit
  • 24V / 16.7A / 400W Power supply, interface PCB, power cord and hardware
  • 500mm Wiring Kit
  • Cable, terminal blocks, hardware
  • 500mm Drag Chain Kit
  • Drag chain, mounting brackets, hardware
  • Tool Kit
  • 10 tools for assembly, including a T25 Torx driver, various wrenches and safety glasses, all in a durable pouch
  • High Speed Steel 2 Flute Upcut Spiral
  • Onsrud bit with 1/4" shank and cutting diameter, good for woods and soft metals

Links
Assembly Instructions
Community Forum
 
Note: Due to the size and weight  of the wasteboard it's not cost effective to ship them from USA so we sourced it locally. Due to that you will not see the silkscreen print on them but other than that they are exactly the same.

Write a review

Note: HTML is not translated!
    Bad           Good

X-CARVE Basic Kit PLUS (500mm)

  • Product Code: RY-503
  • Availability: Pre-Order
  • 1,300.00€

  • Ex Tax: 1,056.91€


all product photos are for illustrative purposes only !