The LM335Z is a very easy-to-use analog temperature sensor. The LM335A works like a Zener diode with a breakdown voltage proportional to absolute temperature at 10mV/°K. Hook up a resistor from 5V and GND, and the LM335Z will output an analog voltage of 2.98V (298 Kelvin is 25C or room temperature).  The output of the sensor is linear, and when calibrated at 25°C the LM335Z has typically less than 1°C error over a 100°C temperature range. The sensor can operate continuously from −40°C to 100°C.
Calibration of the sensor requires a pot connected across the sensor, with the wiper of the potentiometer connected to the adjustment pin of the LM335.
Comes in a through-hole, TO-92 package.
Directly calibrated in °Kelvin
Operates from 400 μA to 5 mA
Less than 1Ω dynamic impedance
Easily calibrated
Wide operating temperature range
Low cost

Write a review

Note: HTML is not translated!
    Bad           Good

Temperature Sensor LM335Z

  • Product Code: TM-043
  • Availability: In Stock
  • 1.65€

  • Ex Tax: 1.34€

all product photos are for illustrative purposes only !