• REAL PLA 2.85mm Grey - Spool 1kg


Polylactic acid or polylactide called PLA is a thermoplastic aliphatic polyester made of renewable resources like corn or starch. PLA has a relative low melting temperature, 175°C, and is a very hard material. You can use it for the most common prints and is easy to print with.

Temperature settings
You only can print with the right temperature settings. The temperature setting can be different on your type of extruder. This is depending on the heat transfer from the extruder to the filament so you can use this as guideline but please adjust it to your own extruder.

Melting temperature: 175 °C
Nozzle temperature:  190°C - 200°C
Heated bed temperature: 30°C

Printing properties

Diameter tolerance: 0.1mm
Diameter: 2.85 mm
Food safe: yes
Color: Gray
Heated bed temp. - Print sticker: 0-30 °C
Temperature - heated bed: 0 - 50 °C
Temperature - extruder: 190 - 210 °C
Filament type: PLA

Spool dimensions
Length filament: 110 m
Weight filament: 1000 g
Weight spool: 300 g
Width: 85 mm
Inner diameter: 60 mm
Outer diameter: 160 mm

Write a review

Note: HTML is not translated!
    Bad           Good

REAL PLA 2.85mm Grey - Spool 1kg

  • Product Code: RW-193-10
  • Availability: Out Of Stock
  • 25.00€

  • Ex Tax: 20.33€

all product photos are for illustrative purposes only !