Package Content: 
1 x 0.4KW spindle motor with with ER11 3.175 collet
1 x Mach3 PWM speed controller( include potentiometer )
1 x  Mount bracket with screws
1 x Power supply 48V 10A

Spindle Motor:
Work voltage: 12-48VDC
Rotation speed: 3000-12000r/min  
Power: 400W
Insulation resistance:>2Megohm
Dielectric strength:400V
Motor Length :  186mm
Axis collet Length: 48mm
Diameter of Axis collect holder:16mm
Repeat accuracy: 0.01-0.03mm
ER11 collect: 3.175mm
Power supply Specification:
Input:AC110V/AC220V±10%  50/60Hz 
Output: DC48V 10A
Adapter power: 480W
Dimension:L130mm * W98mm * H38mm

Wide voltage PWM DC brush motor speed controller:
Applies to DC12-60V low voltage permanent magnet brushed DC motor
Operating Voltage: Wide Voltage (DC) DC12V-DC60V (Max 65V)
Control mode
A: Default potentiometer control (5K-100K),defaults 10K;
B: MACH3 -PWM speed control signal input, external PWM input requirements: level 3.5-12V VPP, frequency 1K-10KHZ, suitable for MACH3 spindle speed control.
Rated current: 10A, overload and short circuit protection current 12A. (Over-current cut output, over current indicator flashes, the potential light is off, over current lift).
Soft-start function. Prevent excessive current caused by the motor and power damage (default 0 seconds soft start), 0-5 seconds adjustable.6.Control power: 12V120W, 24V240W, 36V360W, 48V480W, 60V600W7.
Dimensions: Length 75mm * Width 75mm * high 42mm 8.
Pulse width modulation range: 0% -100%
When using a PWM signal control mode, need to unplug Potentiometer, or it will be unable to use PWM mode). 

Write a review

Note: HTML is not translated!
    Bad           Good

CNC400W Spindle KIT

  • Product Code: LC-654
  • Availability: 3-5 Days
  • 265.00€

  • Ex Tax: 215.45€

all product photos are for illustrative purposes only !