• REAL PLA 1.75mm Black - Spool 3kg

PLA filament Black 1.75 mm 3000 g for 3D printers is of superior quality, produced in The Netherlands.

Real filaments guarantees high-quality and diameter consistent filament, giving you the best 3D printing experience.
Temperature settings
You only can print with the right temperature settings. The temperature setting can be different on your type of extruder. This is depending on the heat transfer from the extruder to the filament so you can use this as guideline but please adjust it to your own extruder.
Melting temperature: 175 °C
Nozzle temperature:  190°C - 200°C
Heated bed temperature: 30°C

Polylactic acid or polylactide called PLA is a thermoplastic aliphatic polyester made of renewable resources like corn or starch. PLA has a relative low melting temperature, 175°C, and is a very hard material. You can use it for the most common prints and is easy to print with.

Diameter tolerance 0.05 mm

Diameter 1.75 mm

Food safe Yes

Color Black

Heated bed temp. - Print sticker 0-30 °C

Temperature - heated bed 0 - 50 °C

Temperature - extruder 190 - 210 °C

Filament type PLA

Length filament 330 m

Weight filament 1000 g

Weight spool 300 g

Width 85 mm

Inner diameter 60 mm

Outer diameter 160 mm

Write a review

Note: HTML is not translated!
    Bad           Good

REAL PLA 1.75mm Black - Spool 3kg

  • Product Code: RW-266-29
  • Availability: Out Of Stock
  • 90.00€

  • Ex Tax: 73.17€

all product photos are for illustrative purposes only !