DescriptionPolylactic acid or polylactide called PLA is a thermoplastic aliphatic polyester made of renewable resources like corn or starch. PLA has a relative low melting temperature, 175°C, and is a very hard material. You can use it for the most common prints and is easy to print with.
You only can print with the right temperature settings. The temperature setting can be different on your type of extruder. This is depending on the heat transfer from the extruder to the filament so you can use this as guideline but please adjust it to your own extruder.
Melting temperature: 175 °C
Nozzle temperature: 190°C - 200°C
Heated bed temperature: 30°C
Diameter tolerance 0.05 mm
Diameter 1.75 mm
Food safe Yes
Heated bed temp. - Print sticker 0-30 °C
Temperature - heated bed 0 - 50 °C
Temperature - extruder 190 - 210 °C
Filament type PLA
Length filament 330 m
Weight filament 1000 g
Weight spool 300 g
Width 85 mm
Inner diameter 60 mm
Outer diameter 160 mm
impressão 3d, impressora 3D, filamento, PLA, ABS, reprap, lisboa
REAL PLA 1.75mm Gray - Spool 1kg
- Product Code: RW-266-7
- Availability: In Stock
- Ex Tax: 20.33€
all product photos are for illustrative purposes only !