• 1.75MM Premium PLA - Strong Black

The Strong Black™ PLA filament is as black as black can get. You know what they say about "once you go black….". Well try to imagine "once you go Strong Black…"!

It doesn't matter which desktop 3D printer you have, as 3D Printing will always go smoothly with Formfutura filament. Our Premium 3mm PLA filament prints perfectly with all common desktop 3D printers. Amongst others:

  • 3D Touch
  • Printrbot
  • Rapidbot, Orca, Mendel
  • Lulzbot
  • AND MANY MORE....!

PLA (Poly-Lactic Acid in full) is a thermoplastic which is extruded from the starch of plants, such as corn, cassava, sugarcane, cereals, or sugar beet. By being derived from biological resources this type of thermoplastic can be biodegradable under the right conditions (such as an active compost heap, with enough presence of oxygen) and therefore has a much lesser environmental impact than thermoplastics derived from fossil fuels. 

Product details

The Premium PLA 3D printer filament is wrapped on a reusable plastic spool which contains approximately 1Kg of filament. Our spool-wrapped Premium PLA filaments are packed in a silica sealed bag and come in a cardboard box. Please see below for more details with respect to the weight and packaging of our spool-wrapped Premium PLA 3D printer filaments: 

Filament Net Weight:

± 1 Kg

Spool Size (D x h):

195 mm x 85 mm

Spool Hub Diameter:

38 mm

Carton Box Size (L x W x H):

205 mm x 205 mm x 90 mm

Packaged weight

1.45 Kg



Poly-Lactic Acid




1.75 mm

Diameter Tolerance:

+0.10 mm / -0.15 mm

Ovalidity Tolerance (max):

± 5%

Density (21.5°C):

1250 kg/m³

Melting Temperature:

~180°C to 200°C

Print Temperature Guideline:

~180°C to 200°C

Print Speed Guideline:


Glass Transition Temperature:

~ 50° C

Impact Strength:

5 KJ/m2












General Tips & Tricks for printing with PLA filaments

The printing temperature guideline for printing with our Premium PLA filament is approximately 180°C to 200°C. As each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to get the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height. 

PLA has much less tendency to warp compared to ABS. Therefore it can be printed both with and without a heated print bed. However, if your desktop 3D printer does have a heated print bed it is recommended to set your print bed temperature to approximately 40° to 50° C.

A good first layer adhesion is of the utmost importance in obtaining the best results for your prints. There are several tricks to get the first layer of your PLA print to stick better to the print bed of your 3D printer.

  • Blue Masking Tape. PLA prints usually stick really well to blue masking tape. When preparing the print bed it is better to have tiny gaps between your strokes of masking tape, rather than having overlaps. Overlaps of smaller pieces of tape may cause difficulties later on during the print process. We have tested a wide variety of masking tapes and found that the best results can be obtained with Blue Masking Tape.
  • Coat your print bed with hairspray. Like ABS, PLA has a tendency to stick really well to extra strong hairsprays.

Blue masking tape is unlikely to leave a residue on your print bed. A hairspray coating however will leave a residue on your print bed.

impressão 3d, impressora 3D, filamento, PLA, ABS, reprap, lisboa

Write a review

Note: HTML is not translated!
    Bad           Good

1.75MM Premium PLA - Strong Black

  • Product Code: FF-381-1
  • Availability: Out Of Stock
  • 30.00€

  • Ex Tax: 24.39€

all product photos are for illustrative purposes only !