What's NEW?

What's the different between Iteaduino UNO and Itaduino ? It does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U28programmed as a USB-to-serial converter, and use the UNO bootloarder instead of Duemilanove bootloader. When you upload the program of Arduino IDE,  choose the "Arduino UNO" under the "Tools"->"Board" memu , not the "Arduino Duemilanove or Nano w/ ATmega328".

The Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Features

  • New external IO pin map

  • Efficient DC-DC Power supply with wide range input.

  • 3.3V/5V Operating Voltage selection

  • All pins out for Sensor and Servo

  • UART/IIC interface breakout

Hardware

Iteaduino UNO

Index

Name of Arduino

Alternate Function

Pin of Atmega328

1

D0

UART DIN

PD0

2

D1

UART DOUT

PD1

3

D2

External Interrupt 0

PD2

4

D3

External Interrupt 1/PWM

PD3

5

D4

-

PD4

6

D5

PWM

PD5

7

D6

PWM

PD6

8

D7

-

PD7

9

D8

-

PB0

10

D9

PWM

PB1

11

D10

SPI_NSS/PWM

PB2

12

D11

SPI_MOSI/PWM

PB3

13

D12

SPI_MISO

PB4

14

D13

SPI_SCK

PB5

15

A0

 

PC0

16

A1

 

PC1

17

A2

 

PC2

18

A3

 

PC3

19

A4

IIC_SDA

PC4

20

A5

IIC_SCL

PC5

 

Specifications:

MicrocontrollerATMega328P
External ResourcesElectronic Brick Interface
RAM Capacity2K
FLASH Capacity32K
I/O Operation Level
  • 3.3V
  • 5V
Board Size68.5mm x 58.5mm
Version1.0

  

Download

Please visit the WIKI PAGE for more info about this product. 

Write a review

Note: HTML is not translated!
    Bad           Good

Iteaduino UNO

  • Product Code: IT-412
  • Availability: In Stock
  • 18.50€

  • Ex Tax: 15.04€