This bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices, with a total of four signals.

This board has pre-soldered pads placed at a standard distance (0.1”) in such a way that the converter can be easily integrated into existing systems through the use of male strip connectors or otherwise used with breadboard or prototyping boards.

The level converter is very easy to use: the board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ‘HV’ pin, low voltage (3.3V for example) to ‘LV’, and ground from the system to the ‘GND’ pin.

The board is provided with two 6-pin 0,100” male strip connectors.

Specifications:

I/O voltage level From 1.8V to 5V

Dimensions 0.61” x 0.51” (15.5 x 13 mm)

Weight 0.02oz / 0.7g

Temperature range -55 +150°C


Write a review

Note: HTML is not translated!
    Bad           Good

Logic Level Converter

  • Product Code: LC-021
  • Availability: In Stock
  • 3.50€

  • Ex Tax: 2.85€