• PLA 1.75mm Salmon Skin - Spool 1kg

Description

Polylactic acid or polylactide called PLA is a thermoplastic aliphatic polyester made of renewable resources like corn or starch. PLA has a relative low melting temperature, 175°C, and is a very hard material. You can use it for the most common prints and is easy to print with.

Temperature settings

You only can print with the right temperature settings. The temperature setting can be different on your type of extruder. This is depending on the heat transfer from the extruder to the filament so you can use this as guideline but please adjust it to your own extruder.
Melting temperature: 175 °C
Nozzle temperature:  190°C - 220°C
Heated bed temperature: 30°C

Printing properties
Diameter tolerance: 0.05
Diameter: 1.75
Specialty: Basso
Food safe: No
Color: Salmon skin
Heated bed temp. - Print sticker: 0-30
Temperature - heated bed: 0 - 50
Temperature - extruder: 180 - 210
Filament type:PLA

Spool dimensions
Length filament: 330
Weight filament: 1000
Weight spool: 300
Width: 65
Inner diameter: 50
Outer diameter: 200

.

Write a review

Note: HTML is not translated!
    Bad           Good

PLA 1.75mm Salmon Skin - Spool 1kg

  • Product Code: RW-266-21
  • Availability: In Stock
  • 25.00€

  • Ex Tax: 20.33€